LAB 5 Cisco : InterVlan Router ON Stick

LAB 5 Cisco : InterVlan Router ON Stick

Topologi yang kita gunakan seperti pada gambar dibawah ini.

Pada Switch1 tambahkan konfigurasi berikut.

Switch>
Switch>en
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#hostna SW1
SW1(config)#vlan 10
SW1(config-vlan)#name vlan10
SW1(config-vlan)#vlan 20
SW1(config-vlan)#name vlan20
SW1(config-vlan)#int fa0/1
SW1(config-if)#sw mode acc
SW1(config-if)#sw acc vlan 10
SW1(config-if)#int fa0/2
SW1(config-if)#swi mode acc
SW1(config-if)#swi acc vlan 20
SW1(config-if)#do sh vlan br

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/3, Fa0/4, Fa0/5, Fa0/6
                                                Fa0/7, Fa0/8, Fa0/9, Fa0/10
                                                Fa0/11, Fa0/12, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18
                                                Fa0/19, Fa0/20, Fa0/21, Fa0/22
                                                Fa0/23, Fa0/24, Gig0/1, Gig0/2
10   vlan10                           active    Fa0/1
20   vlan20                           active    Fa0/2
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active    
SW1(config-if)#int fa0/3
SW1(config-if)#swi mode trunk

SW1(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up

%LINK-5-CHANGED: Interface FastEthernet0/4, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up

SW1(config-if)#
SW1(config-if)#int fa0/4
SW1(config-if)#sw mode trunk

SW1(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up

SW1(config-if)#

Pada Switch2 tambahkan konfigurasi berikut.

Switch>
Switch>en
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#hostname SW2
SW2(config)#vlan 10
SW2(config-vlan)#name vlan10
SW2(config-vlan)#vlan 20
SW2(config-vlan)#name vlan20
SW2(config-vlan)#int fa0/1
SW2(config-if)#swi mode acc
SW2(config-if)#sw acc vlan 10
SW2(config-if)#int fa0/2
SW2(config-if)#swi mode acc
SW2(config-if)#swi acc vlan 20
SW2(config-if)#do sh vlan br

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/3, Fa0/4, Fa0/5, Fa0/6
                                                Fa0/7, Fa0/8, Fa0/9, Fa0/10
                                                Fa0/11, Fa0/12, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18
                                                Fa0/19, Fa0/20, Fa0/21, Fa0/22
                                                Fa0/23, Fa0/24, Gig0/1, Gig0/2
10   vlan10                           active    Fa0/1
20   vlan20                           active    Fa0/2
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active    
SW2(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up

SW2(config-if)#int fa0/3
SW2(config-if)#swi mode trunk
SW2(config-if)#int

Tambahkan konfigurasi berikut pada Router untuk encapsulation.

Router (config)#interface FastEthernet0/1.10
Router(config-subif)#encapsulation dot1Q 10
Router(config-subif)#ip address 10.10.10.1 255.255.255.0

Router(config-subif)#interface FastEthernet0/1.20
Router(config-subif)#encapsulation dot1Q 20
Router(config-subif)#ip address 20.20.20.1 255.255.255.0

Berikan IP Address pada PC Client tersebut

IP Address PC0 (Anggota Vlan10)